4-port High Speed RS-232 & 1-port Parallel Universal PCI Multi-I/O Board + 2x Low-profile dual bracket ( 2 slots required )

4-port High Speed RS-232 & 1-port Parallel Universal PCI Multi-I/O Board + 2x Low-profile dual bracket ( 2 slots required )

  • Brand: Sunix
  • Product Code: AC-Si5099H+L [#23]
  • sku: AC-Si5099H+L
  • Reward Points: 8
  • Availability: In Stock ✓ Ready to ship!
  • Qty available: 23
  • R1,500.44 inc. VAT

  • Ex VAT: R1,304.73
  • Price in reward points: 1501

Qty

Sunix Mio5099H - 2x standard + 2x Low-profile dual bracket ( 2 slots required ) - 4 port high-speed serial ( 16c550 ) + 1 port parallel (SPP/BPP/ECP/EPP) , 32/64bit 3.5/5V pci card , 128+16byte hardware + 128k software FiFo, SUN1989 chipset , 921.6Kbps+1.8Mbps , 15KV ESD protection + 15KV IEC1000-4-2 Air Gap Discharge + 8KV IEC1000-4-2 Contact Discharge

Specifications for this model: AC-Si5099H+L
Full specifications for the entire range
The specifications below may differ from the model's specifications. Please view the above short specification block to verify which features apply in this model. E&OE.

Features:

Overview:

The majority of today motherboards are not equipped with any rs-232 or parallel port. With sunix mio5099h multi i/o board, users can expand four rs-232 and one ieee1284 parallel ports to their system, allowing them to use serial and parallel devices further. Sunix mio5099h is compatible with both 32/64-bit pci architecture supporting 3.3 and 5v bus, allowing the board to be installed in virtually any pc system. Furthermore, sunix mio5099h multi-io card supports majority of the os on the market. We provide driver support for microsoft windows 32/64-bit platform, linux, making it the best and most economical solution for commercial and industrial applications.

Features:

  • Expands 4-port rs-232 com and 1-port ieee1284 lpt on system.
  • Universal pci compatible with 64/32-bit pci-x/pci bus and 3.3/5v connector key.
  • High reliability sunix sun1999 16c950 compatible multi-io controller on-board.
  • Expands four rs-232 serial port with communication speed up to 921.6kbps.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in kv esd protection for all serial signals meets iec1000-4-2 standard.
  • Support ieee 1284-1994 parallel port standard
    * ecp(enhance capacity port) / epp(enhance parallel port)
    * spp(standard parallel port) / bpp(bi-direction parallel port)
  • Auto-switching between ecp/epp/spp/bpp modes without configuration.
  • Plug-n-play, i/o address and irq assigned by system.
  • Certified by ce, fcc, rohs, and microsoft whql approval.
  • Support microsoft windows, linux, and dos.

Specifications:

Copyright belongs to the respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC , however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product CodeAC-Si5099H+L
Product Description 4-port High Speed RS-232 & 1-port Parallel Universal PCI Multi-I/O Board
General
Interface RS-232 and IEEE1284
Controller SUNIX SUN1999 (16C950 UART Compatible)
Bus Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1
IRQ & IO Assigned by System
Serial Communication
Interface RS-232
No. of Port 4-port
FIFO 128 byte (Hardware)
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate 50 bps to 921.6 Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB connector DB44 Female
Cable Connector DB9 Male
Parallel Communication
Interface IEEE1284
No. of Port 1-port
FIFO 16 byte (Hardware)
Signal SPP/ECP/EPP/BPP
Speed Maximum 1.8MBps
PCB connector 13 x 2 Pin Header
Cable Connector DB25 Female
Driver Support
Windows Client XP/Vista/7/8/8.1 (X86/X64)
Windows Server 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64)
Windows Embedded Windows CE 4.2/5.0/6.0
XP Embedded / POSReady 2009 / POSReady 7 / Embedded System
Linux Linux 2.4.x / 2.6.x / 3.x
DOS DOS
Regulatory Approvals
Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS
Software Microsoft WHQL Windows
Windows Client: XP/Vista/7/8/8.1 (X86/X64)
Windows Server: 2000/2003/2008/2008 R2/2012/2012 R2 (X86/X64)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
Dimension
PCB Dimension 120 x 68 mm
Bracket Standard 121 mm
Bracket Space 2

Note

  • Do not support LPT Key Locker Parallel device.
  • LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode.
  • ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Be the first to write a review for this product.

Write a review

Please login or register to review